Here are the latest step by step instructions for installing a USB to serial cable plus identifying and changing your com port number. This works with all Windows operating systems.
I see the message Printer is Offline when I try to print with a USB connection in Windows. What should I do? I see the message Printer is Offline when I try to print with a USB connection on my Mac. What should I do? I see the message Filter Failure with rastertoescpII when I try to print from my Mac. The STUSB1602 can handle all functions from Type-C attach detection, plug orientation detection, host to device connection, V CONN support, and V BUS configuration. It also provides a USB PD TX/RX line driver and BMC (biphase mark coding) transceiver which allows USB PD negotiation and alternative mode through an external MCU.
The following procedure works with all of our cables including the Allen Bradley 1747-UIC, 1761-CBL-PM02, 1747-CP3, and 2711-NC13
1. To begin, click the start menu and type 'Device Manager' and click the Device Manager link.
2. Without your USB to serial adapter plugged in, your Device Manager should look something like below.
3. Plug your USB to serial cable into your PC's USB port. Chances are the drivers are already installed. Look for it to show up under 'Ports (COM & LPT)'. If it does, then note the COM number at the end of the description and proceed to the software you are using it in. If it doesn't show up under 'Ports (COM & LPT)' then proceed to step 4.
Drivers for Broadcom WIDCOMM Bluetooth Driver are no longer available on the Broadcom website because they are typically included with Windows 10,8.1, 8 etc, but for Vista and 7 you’ll need to install them from an alternative source. Bluetooth Software - Broadcom. Remove widcomm bluetooth driver.
4. If your cable does not show up under 'Ports (COM & LPT)' of the Device Manager then you need to install the drivers. They can be found in the PLC Cable Drivers section of our Drivers, Software, and Manuals page. Targus group int port devices driver download for windows 10 kms. Download them and extract the zip file to your PC.
5. Navigate to the 'Drivers for manual installation' folder and you will find two folders named CH340 and CP210.
Unknown Usb Device Driver Download
6. Double click on the CH340 folder and you will find an EXE file in it. Right click it and select 'Run as Administrator'. Note that this will not work by double clicking the EXE file.
Drivers Therapy I&c Usb Devices 3.0
7. Now navigate to the CP210 folder and then to the CP210x_VCP_Windows folder. You will see two EXE files, one for 32 bit and one for 64 bit. Right click the one that matches the processor of your PC and Right click it and select 'Run as Administrator'. Note that this will not work by double clicking the EXE file.