1. Velocitek Usb Devices Driver Update
2. Velocitek Usb Devices Driver Free
3. Velocitek USB Devices Driver
4. Velocitek Usb Devices Driver Download

DriverView v1.50 - Loaded Windows Drivers List Copyright (c) 2003 - 2020 Nir Sofer

How to install the USB Driver for PS Audio USB 2.0 Devices This guide is for installing the USB 2.0 driver in Windows 10, 8, 7. Click this link to download the driver. Periodically firmware updates will be available with bug fixes and enhanced features. To update the firmware you must download either Velocitek Control Center (for Windows) or Velocitool (for Mac) and connect your device to a computer. USB™ multi-port adapters with Ethernet connectivity and some Ethernet adapters are not compatible at this time (due to IC design). Click here for more information. The display driver does not support Mac® computers with the M1 processor at this time, contact your computer manufacturer to verify if your computer supports the display driver. Check Device Manager to see if the Apple Mobile Device USB driver is installed. Follow these steps to open Device Manager: Press the Windows and R key on your keyboard to open the Run command. In the Run window, enter devmgmt.msc, then click OK. Device Manager should open. Locate and expand the Universal Serial Bus controllers section.

See Also

GPS speedometer for sailing and other applications. Big numbers, easy to install, accurate, waterproof. Includes speed, heading, maximum speed and automatic shift tracking. What’s Included: Velocitek SpeedPuck USB Cable Sticker Quick Start Guide Lanyard Mounting Cradle.

• DevManView - Alternative to device manager of Windows.
• ServiWin - Alternative to Windows services module - start/stop/restart service
• NK2Edit - Edit, merge and repair the AutoComplete files (.NK2) of Microsoft Outlook.

Description

DriverView utility displays the list of all device drivers currently loadedon your system. For each driver in the list, additional useful information is displayed:load address of the driver, description, version, product name, company that created the driver, and more.

Search for other utilities in NirSoft

System Requirement

This utility works under Windows 2000, Windows NT, Windows XP, Windows Vista, Windows 7, Windows Server 2003/2008, Windows 8, and Windows 10. Windows 98 and Windows ME are not supported.If you want to run this utility on Windows NT, you should download the 'psapi.dll' and place it in your system32 directory.

Versions History

• Version 1.50:
  • Fixed bug: On 64-bit systems, DriverView always displayed zero in the upper 32-bits of the memory address instead of the correct value.
• Version 1.47:
  • Fixed to display the correct driver version on Windows 10.
• Version 1.46:
  • Added secondary sorting support: You can now get a secondary sorting, by holding down the shift key while clicking the column header. Be aware that you only have to hold down the shift key when clicking the second/third/fourth column. To sort the first column you should not hold down the Shift key.
• Version 1.45:
  • Added 'Digital Signature' column, which displays the signer name if the driver is signed with a digital signature.This column is active only when 'Read Digital Signatures' option (Under the Options menu) is turned on. (by default it's turned off)
• Version 1.43:
  • Added secondary sorting: When clicking the column headers of 'File Type', 'Company', and other columns , the list is sorted by the selected column first, and then by the 'Driver Name' column.
• Version 1.42:
  • Fixed the flickering occurred while scrolling the drivers list.
• Version 1.41:
  • Fixed issue: On Windows 7/2008/Vista, DriverView displayed the incorrect driver version for some driver files.
• Version 1.40:
  • Added 'Beep On Drivers Change' option. (For using when 'Automatic Refresh' is turned on)
• Version 1.36:
  • You can now drag one or more driver files from the window of DriverView into Explorer window or other application.
• Version 1.35:
  • Added 'Service Name' and 'Service Display Name' columns.
• Version 1.31:
  • Added 'End Address' column.
• Version 1.30:
  • Added 3 new columns: Size, Load Count, and Index.
• Version 1.25:
  • Added 'Add Header Line To CSV/Tab-Delimited File' option. When this option is turned on, the column names are addedas the first line when you export to csv or tab-delimited file.
• Version 1.21:
  • Improved the Microsoft drivers detection - DriverView can now also detect Microsoft drivers in non-English languages.
• Version 1.20:
  • Added sorting command-line options.
• Version 1.17:
  • Added 'Google Search' option, which opens a Google search of the current selected driver filename in your default Web browser.
• Version 1.16:
  • Added new option: Hide Microsoft drivers.
• Version 1.15:
  • Added new option: Mark Non-Microsoft Drivers.
• Version 1.14:
  • Fixed bug: The main window lost the focus when the user switched to another application and then returned back to DriverView.
• Version 1.13:
  • Added support for saving as comma-delimited text file.
• Version 1.12:
  • Added support for x64, as a separated download.
• Version 1.11:
  • The configuration is now saved to a file, instead of the Registry.
• Version 1.10:
  • Find dialog-box
  • New column: Created Date.
  • Added support for translating to other languages.
  • Added support for XP style.
  • Save to XML.
  • 'Copy Selected Items' now copy the items as tab-delimited text.
• Version 1.00 - First release.

Using The DriverView Utility

This utility is a standalone executable, so it doesn't require any installation process or additional DLLs. Just run the executable (driverview.exe) and start using it. There is only one exception: If you want to run this utility on Windows NT, you should download the 'psapi.dll', and copy it into the system32 folder.

The main window of DriverView utility displays the list of all loaded drivers on your system.You can select one or more drivers from the list, and then copy the details of these drivers to theclipboard, save them to text or HTML file, or watch them as HTML report in your browser.
In addition, you can change the order of the columns in the drivers table by dragging them tothe desired position, or by using the 'Choose Columns' dialog-box.

Command-Line Options

Disclaimer

The software is provided 'AS IS' without any warranty, either expressed or implied,including, but not limited to, the implied warranties of merchantability and fitnessfor a particular purpose. The author will not be liable for any special, incidental,consequential or indirect damages due to loss of data or any other reason.

Translating DriverView to other languages

In order to translate DriverView to other language, follow the instructions below:

1. Run DriverView with /savelangfile parameter:
   DriverView.exe /savelangfile
   A file named DriverView_lng.ini will be created in the folder of DriverView utility.
2. Open the created language file in Notepad or in any other text editor.
3. Translate all string entries to the desired language.Optionally, you can also add your name and/or a link to your Web site. (TranslatorName and TranslatorURL values) If you add this information, it'll be used in the 'About' window.
4. After you finish the translation, Run DriverView, and all translated strings will be loaded from the language file.
   If you want to run DriverView without the translation, simply rename the language file, or move it to another folder.

Feedback

If you have any problem, suggestion, comment, or you found a bug in my utility, you can send a message to nirsofer@yahoo.com

Option	Description
/stab <Filename>	Saves the list of all drivers into a tab-delimited text file.
/stabular <Filename>	Saves the list of all drivers into a tabular text file.
/sverhtml <Filename>	Saves the list of all drivers into vertical HTML file.
/sort <column>	This command-line option can be used with other save options for sorting by the desired column.If you don't specify this option, the list is sorted according to the last sort that you made from the user interface.The <column> parameter can specify the column index (0 for the first column, 1 for the second column, and so on) orthe name of the column, like 'Address' and 'File Type'.You can specify the '~' prefix character (e.g: '~Driver Name') if you want to sort in descending order.You can put multiple /sort in the command-line if you want to sort by multiple columns. Examples: DriverView.exe /shtml 'f:tempdrivers.html' /sort 2 /sort ~1 DriverView.exe /shtml 'f:tempdrivers.html' /sort 'File Type' /sort 'Driver Name'

Download DriverView

Download DriverView for x64

DriverView is also available in other languages. In order to change the language of DriverView, download the appropriate language zip file, extract the 'driverview_lng.ini', and put it in the same folder that you Installed DriverView utility.

Language	Translated By	Date	Version
Arabic	Abo Rehaam	14/03/2012	1.40
Brazilian Portuguese	Paulo Guzmán	11/08/2018	1.47
Dutch	Jan Verheijen	10/09/2020	1.50
French	Skorpix38	09/09/2013	1.45 (09sept2013)
French	Gronaz de Coarraz	20/11/2012	1.41
Galician	Xosé Antón Vicente Rodríguez	20/01/2008
German	«Latino» auf WinTotal.de	07/09/2020	1.50
Greek	geogeo.gr	10/02/2015	1.46
Hebrew	15/09/2006
Hungarian	Hevesi János	27/05/2008
Italian	Massimo Pizzolante Leuzzi	28/11/2013	1.45
Japanese	JP-TRANSLATE@SABAITIBA	17/09/2009
Korean	EcLipSe(imfeelin@gmail.com)	29/08/2005
Polish	Wojciech Sabaj	28/07/2012	1.41
Romanian	Jaff (Oprea Nicolae)	09/09/2013	1.45
Russian	Dmitry Yerokhin	12/09/2013	1.45
Simplified Chinese	DaiXQ021补充汉化_1.47版	07/03/2020	1.47
Serbian	Christian Adzic Robert	30/08/2006
Slovak	František Fico	15/09/2020	1.50
Spanish	Andres Fulco	12/03/2016
Swedish	I.K.l	30/05/2017	1.47
Taiwanese	Republic Of Taiwan	17/11/2005
Traditional Chinese	Danfong Hsieh	08/10/2015
Thai	ประสิทธิ์ แคภูเขียว	24/03/2008
Turkish	Cemil Kaynar	11/04/2017
Turkish	Nejdet Acar	23/04/2012
Ukrainian	Lembergman	17/08/2017	1.47
Valencian	vjatv	30/09/2007

Does the new ProStart fit the classic ProStart mounting cradle?

Yes. The new ProStart and the classic ProStart use the same mounting cradle.

What is the update rate of the ProStart?

The new ProStart's GPS updates at 18 Hz (18 times per second).

The new ProStart's LCD updates at 4 Hz (4 times per second).

The GPS in the classic ProStart updates at 4 Hz (4 times per second).

The classic ProStart's LCD updates at 2 Hz (twice a second).

What determines the conditions where I might use different damping levels on my Prism (0, 1, 2)?

Selecting the appropriate damping level is a personal preference usually based on the wind and water conditions.

For example, in steady wind and flat water, no damping (level 0) is necessary. However, in high wind with lumpy water damping will eliminate large heading variations that can make judging a wind shift difficult.

Does the Makai have track storage?

At this time, the Makai does not have on board GPS data storage which can be downloaded. However, the Makai does store the data from your session and recalls it in Results Mode. At the end of a session, when you press the button on the Makai it enters Results Mode and it displays the max and average speeds, distance traveled, and elapsed time of your session.

To access results mode press the button at the end of your session and the data will come up on the screen.

Many of the elite paddlers and trainers who use the Makai tell us they take this data and put it into a workout journal or spreadsheet to track their progress.

Why no VMG?

Velocitek created the world's first GPS-based VMG tool back in 2006. VMG was also a prominent feature on the Velocitek SC-1, the ProStart’s direct predecessor. When several other companies around the world tried to copy the SC-1’s success they also included a VMG feature on their products. Velocitek’s tag line even used to be “Velocity. Made Good.”

The reason why we decided to drop VMG as a feature on the ProStart is that we couldn't find any professional sailors who used this feature while racing. The main reason the pros don't like to look at VMG when they are racing is that the boat's momentum makes it difficult to use these measurements to find an optimal heading.

As an example, imagine this:

You are on a broad reach and then you decide to try pointing lower. Initially your speed will not change very much because of your boat's momentum. The indicated VMG will jump up (same speed as before, better angle). You are happy; the instrument seems to be telling you that soaking low was a good idea.

As you hold your course steady at this new angle, your speed will eventually drop and, as you are falling off a plane, the instrument will finally come around to telling you the truth: this new, deeper angle was, in fact, a very bad idea.

The trouble is that by now you are losing boats like crazy and you're going to have to head way up to get planing again; the damage is done.

The above notwithstanding, these measurements can be useful for training, especially when you don't have other boats to sail against. A GPS VMG instrument can help you figure out what the optimal settings and angles are for your boat in different conditions. It's just that these things need to be figured out before you are actually racing.

Our goal with the ProStart was to make an extremely easy to use instrument that only incorporated the features that pro sailors use when they are racing. There is definitely a good justification for selling a VMG product as a training tool but the feature did not fit with our brief for the ProStart.

Download ULI chipset drivers or install DriverPack Solution software for driver scan and update. Download Download DriverPack Online. ULI chipset drivers. Windows XP, 7, 8, 8.1, 10 (x64, x86) Category: chipsets. Subcategory: ULI chipsets. ULI Driver Download for windows 10. Download ULi SATA Controller (M5287) for Windows to sCSIAdapter driver. Download ULi Drivers Integrated220. U2v219exe: for Microsoft Windows driver. File Size: 62.4KB Platforms CUDA-X; Autonomous Machines; Cloud & Data Center; Deep Learning & AI; Design and Visualization; Healthcare & Life Sciences; High Performance Computing. Download ULi USB 2.0 Enhanced Host Controller for Windows to uSB driver.

How do I update the firmware on my Velocitek device?

Contact Velocitek technical support for firmware update instructions.

How do I download the tracks off my Velocitek device?

To download tracks of your new ProStart you connect the device to the computer via the USB cable and the ProStart will appear as a USB mass storage device. The files can be opened from the ProStart or dragged and dropped onto your desktop.

To download the tracks off your ProStart Classic or SpeedPuck you need to download and install Velocitek Control Center. Velocitek Control Center is available for download from our software page.

Where can I download Velocitek Control Center?

Velocitek Control Center is available for download from our software page.

How do I use the bow offset on my ProStart Classic?

On the ProStart Classic, we recommend zeroing out the bow offset and ping when the bow of the boat is on the line. When pinging it is helpful to approach the line with a consistent speed (slow) and angle, this will allow for the most accurate ping. We also recommend you hard mount the ProStart on your boat for the most consistent measurements possible. When you ping this way, you must approach the committee boat and pin from below the line.

Pinging with the bow offset works when you can approach the line with a consistent speed and angle. However this not how real world starting conditions usually play out. Drastic changes in speed and direction as you jockey for position are more normal. Using the bow offset adds your course over ground (COG) to the distance to line solution. Because of this, aggressive pre-start maneuvering can make the distance to line calculation with the bow offset less accurate.

Zeroing out the bow offset and pinging when the bow is on the line means your distance to line measurement is a simple position calculation and relies on the fewer variables.

The new ProStart solves this problem with the integration of a magnetic compass. In short, COG is a bad substitute for magnetic heading for locating your bow in the prestart.

Why does my ProStart Classic or SpeedPuck read so differently than my compass?

Velocitek Usb Devices Driver Update

The ProStart Classic and SpeedPuck will show slightly different numbers from a magnetic compass, even when you have the magnetic declination setup perfectly. The reason for this is that the ProStart Classic and SpeedPuck display course over ground (COG) which is the direction you are moving. A magnetic compass shows the direction you are pointing. Even in the absence of current, these two numbers will not be exactly the same due to leeway / sideslip.

Velocitek Usb Devices Driver Free

How do I find my local magnetic declination?

This website, provided by NOAA, will allow you to look up the magnetic declination for your sailing area: http://www.ngdc.noaa.gov/geomag-web/#declination

Is my local magnetic declination positive or negative?

Paraphrasing Wikipedia:

Magnetic declination is most often given as the size of the angle between magnetic and true north, and the direction from true north to magnetic north.

For instance, '10° W' would indicate that magnetic north lies 10 degrees counter-clockwise from true north.

When declination is described by a signed number without a direction, a positive angle indicates clockwise from true north and a negative counter-clockwise. For example, '-10°' would indicate the same as the '10° W' just discussed.

Bottom line: if your local declination is East, enter a positive declination angle into your Velocitek device. If your local declination is West, enter a negative number.

How do I attach a lanyard to my Velocitek device?

The ProStart has a lanyard loop on the back of the device and a corresponding loop on the cradle.

The SpeedPuck lanyard attaches to the post at the bottom on the device.

The Shift has a post at the bottom corners of the device for attaching a lanyard.

What are the dimensions of a Velocitek device?

The Shift is 100 mm tall x 158 mm wide x 47 mm thick

The ProStart is 120 mm tall x 175 mm wide x 40 mm thick

Velocitek USB Devices Driver

The SpeedPuck is 115 mm diameter x 27 mm thick

Toshiba mobile phones & portable devices driver download. The Makai is 130 mm tall x 80 mm wide x 30 mm thick

Where do I return my broken Velocitek device?

Please fill out this form with the details of your broken Velocitek device and we will reply with return instructions: https://www.velocitek.com/pages/broken-product-report

Where do I find the serial number of my Velocitek product?

The serial number for the ProStart is etched onto the back black fascia.

The serial number for the ProStart Classic and SpeedPuck is located inside the battery compartment above the USB port.
The serial number for the Shift is located in the gray trough on the back of the product between the debossed Velocitek logo and the blue Shift logo.

The serial number for the Makai is located under the USB charge port lid.

Velocitek Usb Devices Driver Download

The serial number for the Prism is etched into the border of the orange back plate.

What type of fasteners are used in the Velocitek Mast Brackets?

The stainless steel fasteners are all M4 x 0.7 pitch.

Where do Velocitek products ship from?

All Velocitek products ship from our fulfillment warehouse in San Leandro, CA (near San Francisco).